Wednesday, September 07, 2016

Haven't said this in a while

but "Thank You" to all of you who read this blog.  It would be foolish and time wasting for me to do this if you weren't out there. From the e-mails, photos and comments I receive, I know that you all are, indeed, out there. Again, thank you so very much.

On the QRP side of things, I see from an e-mail by Doug KI6DS to the QRP-L list that the QRPGuys have a new kit offering out. The following is their description:

The QRPGuys Multi-Tuner is a Z-match design that will match a wide range of coax fed, long wire, and balanced line antennas, like high-impedance, low-loss UHF twinlead or ladder line for 40m-10m. 

It uses the N7VE integral led swr indicator with an absorptive bridge to protect your final transistors from a poor match. In the TUNE position, you cannot damage your transmitter caused by a high SWR. It is looking at a 50 ohm load and the LED is indicating only the reflected power. At full brilliance your SWR is 4:1 or greater, at half brilliance your SWR is approximately 2:1, and the LED will completely extinguish at 1:1. 

Rated for 5 watts continuous, 10 watts intermittant, weighs (4.3 oz.) and comes with female BNC connectors for the input/output, with S.S. hardware for the long wire and balanced line connections. There is no point to point wiring. All connections are accomplished by mounting the components on the PCB. This kit can be built in a couple of hours. On a difficulty scale of 1 to 5, 5 being the most difficult, this is rated at 3.

For more information, and ordering, you can go to  http://www.qrpguys.com/

I don't have to tell you (but will, anyway) how important it is for us to patronize concerns like QRPGuys, QRPMe, QRP Kits, SOTA Beams, and the numerous other QRP vendors around the world that are out there. Blogging is my way to give a bit back to the hobby. Offering kits is the way these guys give back to the hobby. Yeah, they are there to make a buck or two; but they're definitely not in this with visions of becoming the next Elecraft. You keep me "in business' by reading; and we keep them in business (and as a result, keep the QRP hobby alive) by purchasing their wares.

72 de Larry W2LJ
QRP - When you care to send the very least!

2 comments:

  1. tom AJ4UQ8:15 PM

    We keep on reading because we enjoy your writing...

    what's next in the saga of the neighbor's tree?

    ReplyDelete
  2. Love your Blog Larry. It is always the first visit of my "Ham Day". Your style and substance are the best and your photos are fabulous. Keep on keeping on!

    72,

    George
    K2WO

    ReplyDelete